Frameless Pedestals

exhibit-pedestal-1Angle Mount Pedestal – Post(s) with PlateFrameless pedestal for angle mounting self supporting (½” and thicker) panels. An aluminum mounting plate, with pre drilled holes, is mechanically fastened to an aluminum 3”x3” “Post with Plate”. The pre-drilled holes in the mounting plate correspond with tapped or drilled holes in the self supporting panels allowing for fastening by blind mount or thru-bolt. A double leg pedestal can be achieved with the use of two pedestals. Hole pattern template provided.

exhibit-pedestal-2Flush Mount Pedestal – Post(s) with PlateFrameless pedestal for upright mounting self supporting (½” and thicker) panels. An aluminum mounting plate, with pre drilled holes, is mechanically fastened to an aluminum 3”x3” “Post with Plate”. The pre-drilled holes in the mounting plate correspond with tapped or drilled holes in the self supporting panel allowing for fastening by blind mount or thru-bolt. A double leg pedestal can be achieved with the use of two pedestals. Hole pattern template provided.

exhibit-pedestal-3Upright Pedestal – Posts with Flange. An upright pedestal for mounting self supporting (½” and thicker) panels. An aluminum mounting flange, with pre-drilled holes, is welded to 3”x3” aluminum posts. The pre-drilled holes in the flange correspond with tapped or drilled holes in the self supporting panel allowing for fastening by blind mount or thru-bolt. Hole pattern template provided.

exhibit-pedestal-4Angle Mount Cantilever Pedestal – Posts with FlangeA cantilever pedestal for the angle mounting of self supporting (½” and thicker) panels. An aluminum mounting flange, with pre drilled holes, is welded to an aluminum cantilevered post. The pre-drilled holes in the flange correspond with tapped or drilled holes in the self supporting panel allowing for fastening by blind mount or thru-bolt. Standard panel heights for this pedestal are 18 and 24”. Hole pattern template provided.

exhibit-pedestal-5Angle Mount Traditional Pedestal – Posts with FlangeA traditional style pedestal for the angle mounting of self supporting (½” and thicker) panels. A 6” wide support post extends from the center line of an angled aluminum extrusion with a welded pre-drilled mounting flange. The pre-drilled holes in the flange correspond with tapped or drilled holes in the self supporting panel allowing for fastening by blind mount or thru-bolt. This pedestal style can accommodate panel heights of 24”, 30”, and 36”. Hole pattern template provided.

exhibit-pedestal-6Angled Mount Plate with Sleeve for Lumber Post(s)An angled pre-drilled mount plate welded to a sleeve that fits over a recycled plastic lumber or wood 4”x4” post. The pre-drilled holes in the mount plate correspond with tapped or drilled holes in the self supporting panel allowing for fastening by blind mount or thru-bolt. Hole pattern template provided.